Scale: 1/32
 
Includes 1 spinner and propeller hub.  Choose 1 of the 3 types available.
 
Recommended for:
Revell 1/32 scale Bf 109 G-6 (new tool)
Revell 1/32 scale Bf 109 G-10 Erla
Revell 1/32 scale Bf 109 K-4
and more!
 
The model has a slots sized for Revell Bf 109 kits' propeller shaft and propeller blades.  This model can be adapted to fit 1/32 scale Hasegawa kits' propeller shafts and blades.  A spinner for Trumpeter Bf 109 kits is available separately.
 
Please compare the following dimensions to your kit to ensure that this model is a good match.
 
Dimensions:
Spinner baseplate outer diameter = 23.7 mm (0.933 inches).
Spinner baseplate hole diameter for propeller shaft = 2.0 mm (0.079 inches).
Propeller hub slot diameter for propeller blades = 1.9 mm (0.075 inches).

​​This model represents the spinner and propeller hub of the World War Two-era Messerschmitt Bf 109 F, Bf 109 G, and Bf 109 K fighter aircraft. The model was designed from Messerschmitt factory drawings.
 
Many spinners fit to real Bf 109 fighters were supplied by subcontractors.  Surface details differed depending on the subcontractor's method of manufacture.  Therefore, spinners varied from aircraft to aircraft.  Three common spinner configurations are available.  For our purposes, the different available configurations are called "Type A", "Type B" and "Type C".  Check your references to know which is correct for the specific aircraft you are modeling.
 
The difference between types is two-fold: surface features and shape.
Type A: smoothest, rivet/spot-weld detail limited to the spinner base plate
Type B: considerable rivet/spot weld pattern, same shape as Type A
Type C: most surface detail.  The real spinner had a detachable cap around the cannon blast tube.  This feature is captured in the model.  Type C has a slightly different shape than Types A and B.  Type C is very slightly shorter exposing more of the blast tube although the blast tube itself is the same length as Types A and B.
 
Please choose one of the three types when ordering.
 
Propeller blades are not included.  The slots in the propeller hub for propeller blades are 1.9 mm in diameter, compatible with Revell kits' propeller blades.
 
© Model Monkey LLC.  This 3D-printed product may not be copied or recast.