Scale: 1/350

Set includes 3 anchors and 3 shanks.

Recommended for:
Banner 1/350 scale USS Arizona BB-39 (1941)
Hobby Boss 1/350 scale USS Arizona BB-39 (1941)
Iron Shipwrights 1/350 scale USS Utah BB-31 (1930's) 
Iron Shipwrights 1/350 scale USS Texas BB-35 (1944)
Iron Shipwrights 1/350 scale USS Nevada BB-36 (1941)
Iron Shipwrights 1/350 scale USS Nevada BB-36 (1944)
Iron Shipwrights 1/350 scale USS Oklahoma BB-37 (1941)
Iron Shipwrights 1/350 scale USS West Virginia BB-48  (1941)
Iron Shipwrights 1/350 scale USS Tennessee BB-43  (1944) with optional parts for USS West Virginia BB-48
Iron Shipwrights 1/350 scale USS Maryland BB-46  (1941)
Iron Shipwrights 1/350 scale USS West Virginia BB-48  (1941)
Mini Hobby Models 1/350 scale USS Arizona BB-39  (1941)
Toms Modelworks 1/350 scale USS Arizona BB-39  (1941)
Toms Modelworks 1/350 scale USS West Virginia BB-48  (1941)
Trumpeter 1/350 scale USS New York  BB-34
Trumpeter 1/350 scale USS Texas  BB-35
and more!
 
This set of model anchors is patterned on the US Navy's standard 30,000 pound anchors used on pre-war battleships such as USS Arizona, USS Pennsylvania, USS New York, USS Texas, USS Nevada, USS Oklahoma, USS New Mexico, USS Mississippi, USS Idaho, USS California, USS Tennessee, USS Colorado, USS Maryland and USS West Virginia, among others.

A set of 2 anchors for fast battleships of the North Carolina, South Dakota, Iowa and Montana classes is available separately.

Assembly instructions: remove all parts from the sprue, insert the shank through the bottom of the anchor.  Do not glue the shank to the anchor.  A small retaining pin is needed to hold the shank in the crown (the bottom of the flukes).  This part is too small in diameter to be printed.  Use another material such as a small wire, 0.4mm in diameter.  Insert your retaining pin through the small hole at the bottom of the anchor and glue in place.  The shank will then swivel freely.

These parts are designed for a tight fit.  While producing exceptional detail, acrylic plastic is extremely brittle and breaks easily.  Trim parts, if necessary, rather than force them into place.

© Model Monkey LLC.  This 3D-printed product may not be copied or recast.